STAY IN THE LOOP WITH THE BOLTZ.COM NEWSLETTER!
Newsletter
Search results for: 'Assembly instructions cd rack'
- Related search terms
- assembly instruction cd 600
- assembly instructions for LP rack
- rack per lcd
- assembly+instruction+cd+600
- assembly+instructions+for++LP+rack
-
330 CD Floor Rack Expansion Kit (CDEXP-S)$139.00This expansion kit holds 330 CDs. It will double the capacity of a CD-330 to 660 CDs or triple the capacity of a CD-150 to 450 CDs. Can also be attached to a CD-600 or CD-275 for unique storage solutions. Takes approximately 30 minutes to attach to existing rack and includes all hardware needed and a Boltz wrench.
Warning: Expansion kits will not support your collection without being attached to a compatible rack.
Learn More -
600 CD Floor Rack Expansion Kit (CDEXPT-12)$219.00This 12" wide expansion kit will increase your CD-600 or CD-275 capacity by 300 CDs. It is exactly like the standard 24" wide expansion kit except in the width. There is no limit to how many expansion kits you can add to your system. Each kit uses precision fasteners to connect and only takes about 40 minutes to add to your existing racks.Warning: Expansion kits will not support your collection without being attached to a compatible rack.Learn More
-
600 CD Floor Rack Expansion Kit (CDEXP-T)$219.00This expansion kit will increase your CD-600 or CD-275 capacity by 600 CDs. There is no limit to how many expansion kits you can add to your system. Each kit uses precision fasteners to connect and only takes about 40 minutes to add to your existing racks. Note: CD & Multimedia racks can not be connected.Learn More
Warning: Expansion kits will not support your collection without being attached to a compatible rack. -
CD Floor Rack & Shelving (CD-275)$269.00This rack holds a lot of CDs without eating up a lot of real estate. Ideal for corners or where space is at a premium, this rack is only 12" wide. You can store 275 CDS, with each of the 11 tiers holding 25 CDs. Slider dividers are provided to organize your collection. Also includes stabilizer feet and wall support brackets (not required, but can be used independently or both). Ships unassembled and takes 30 - 45 minutes to put together.Learn More
-
CD Wall Rack & Shelving (CD-110)$99.00
This cool little wall hanging rack holds 110 CDs. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps CDs in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 10 - 15 minutes to put together.
Learn More -
CD, DVD, VHS Multimedia Wall Rack & Shelving (MM-76)$119.00
This cool wall hanging rack holds 76 DVDs / 110 CDs / 36 VHS. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps stored media in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 10 - 15 minutes to put together.
Learn More -
CD Wall Rack & Shelving (CD-220)$189.00
Take the CD-110 and multiply it by 2 and you get double the capacity and double the cool. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps CDs in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 20 - 30 minutes to put together.
Learn More -
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-1008)$849.00
For the ultimate multimedia connoisseur, there are no limits with our MM-252 + 3 expansion kits. Whether your collection is comprised of DVDs, CDs, VHS, SACD, DVD-Audio or all of the above, this rack will allow you to organize and enjoy a lifetime of movies and music. This huge system holds 1,008 DVDs, 1,540 CDs or 588 VHS and can be expanded even further by adding more expansion kits - AMAZING! Includes one unassembled MM-252 and three unassembled MMEXP-T expansion kits.
Learn More -
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-756)$659.00
For the ultimate multimedia connoisseur, there are no limits with our MM-252 + two expansion kits. Whether your collection is comprised of DVDs, CDs, VHS, SACDs, DVD-Audio or all of the above, this rack will allow you to organize and store 756 DVDs, 1,155 CDs, or 441 VHS. Expandable as needed for a lifetime of enjoyment. Includes one unassembled MM-252 and two unassembled MMEXP-T expansion kits.
Learn More -
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-504)$469.00
For the music and movie connoisseur that collects media in all formats, the MM-252x2 fits the bill. Whether your collection is comprised of DVDs, CDs, VHS, SACD, DVD-Audio or all of the above, this rack will allow you to organize and enjoy a lifetime of movies and music. Increase the capacity of this rack as your collection grows by adding expansions kits. Includes one unassembled MM-252 and one unassembled MMEXP-T expansion kit.
>> view more images of our multimedia racks
Learn More -
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-252)$279.00The ultimate in multimedia storage, the MM-252 will hold DVDs, CDs, VHS, SACD, DVD-Audio, and books as well. The solid steel construction and incredible powder coat finish create a multimedia rack that is as strong as it is beautiful, plus it's expandable to grow with your collection (see our MMEXP-T). Add as many expansion kits as you need to increase the rack's capacity. Individual slider dividers on each of the 7 tiers allows you to organize or categorize your vast media library. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Ships unassembled and takes 30 - 45 minutes to put together.Learn More
-
CD, DVD, VHS Multimedia Rack & Shelving Expansion Kit (MMEXP-T)$199.00
Expand your MM-252 series or MM-126 with an expansion kit. There is no limit to how wide you can build your system. Each section uses precision fasteners for simple, easy assembly. Each expansion kit increases your rack's width by 24". Approx. assembly time is 40 minutes per kit. Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack.
Learn More -
CD Floor Rack & Shelving (CD-150)$179.00This 6 tier floor standing CD rack will hold up to 150 CDs, but it can be infinitely expanded by adding our expansion kit(s) as your collection grows. Each tier has a slider divider for quick and easy organization of your CDs. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Ships unassembled and takes 20 - 30 minutes to put together.Learn More
-
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-126)$259.00Ideal for anywhere that space is at a premium. Only 12" wide but 7 tiers high, this rack will hold 126 DVDs, 175 CDs or 63 VHS. 100% steel construction with a beautiful and durable powder coat finish. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Will also hold Console games, SACD and DVD-Audio. Ships unassembled and takes 30 - 45 minutes to put together.Learn More
-
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-72)$169.00Made in the USA from 100% steel then painted with a beautiful and durable powder coat finish. The MM-72 is a floor standing multimedia rack that holds 72 DVDs, 100 CDs or 36 VHS. A steel slider divider on each tier keeps your media in place. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Ships unassembled and takes 20 - 30 minutes to put together.Learn More
-
CD Floor Rack 600$299.00
Our best selling CD rack can hold up to 600 CDs and is expandable to grow with your collection (see our CDEXP-T). Add as many expansion kits as you need to increase the rack's capacity. It's great looking, too, with an incredible baked on powder coat finish.
Each tier has a slider divider for easy CD management. Stabilizer feet and wall brackets are included (not required, but can be used independently or both). Ships unassembled and takes 30 - 45 minutes to put together. Available in 3 finishes.
Learn More -
CD, DVD, VHS Multimedia Rack & Shelving Expansion Kit (MMEXPT-12)$199.00Now you can add an extra 12" of storage (126 DVDs) to your Multimedia rack! Increase your MM-252 capacity by half or double the capacity of your MM-126! There is no limit to how wide you can build your system. Each section uses precision fasteners for simple, easy assembly. Each expansion kit increases your rack's width by 12". Ships unassembled. Approx. assembly time 40 minutes per kit, no tools necessary.
Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack. Cannot be connected to any CD racks.
Learn More -
CD Floor Rack & Shelving (CD-2400)$929.00
The versatile CD-600x4 holds 2400 CDs on its own or can be expanded to epic proportions, housing even the most prolific audiophile's collection with ease. Each tier has a slider divider for easy CD management. Ships with stablizer feet and wall support brackets (not required, but can be used independently or both). Includes one unassembled CD-600 and three unassembled tall expansion kits.
Learn More -
CD Floor Rack & Shelving (CD-1200)$509.00
The versatile CD-600x2 holds 1200 CDs on its own or can be expanded to epic proportions, housing even the most prolific audiophile's collection with ease. Each tier has a slider divider for easy CD management. Ships with stabilizer feet and wall support brackets (not required, but can be used independently or both). Includes one unassembled CD-600 and one unassembled tall expansion kit.
Learn More -
CD Floor Rack & Shelving (CD-330)$209.00This high capacity 6-tier floor standing storage system holds up to 330 CDs, but is easily expanded as your collection grows (see our CD-EXP-S). Each tier has an individual slider divider for better CD management. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Ships unassembled and takes 20 - 30 minutes to put together.Learn More
-
CD, DVD, VHS Multimedia Rack & Shelving Expansion Kit (MMEXP-S)$129.00
Add an expansion kit to double the capacity of a MM-160 to 320 DVD's, 440 CDs, 168 VHS or combo. Triples the capacity of the MM-72 to 232 DVDs, 500 CDs, 108 VHS or combo. Can also be attached to a MM-126 or MM-252. Approx. assembly time is 20 minutes. Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack.
Learn More -
CD, DVD, VHS Multimedia Floor Rack & Shelving (MM-160)$199.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. A steel slider divider on each of the 4 tiers keeps 160 DVDs, 220 CDs or 84 VHS tapes in place. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Ships unassembled and takes 20 - 30 minutes to put together.Learn More
-
CD Floor Rack & Shelving (CD-1800)$719.00
The versatile CD-600x3 holds 1800 CDs on its own or can be expanded to epic proportions, housing even the most prolific audiophile's collection with ease. Each tier has a slider divider for easy CD management. Ships with stabilizer feet and wall support brackets (not required, but can be used independently or both). Includes one unassembled CD-600 and two unassembled tall expansion kits.
Learn More -
7 Tier Book Rack (PBR-7T)$259.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. A steel slider divider on each of the 7 tiers keeps your books in place. Three rods per tier can be used to store and display magazines. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). This rack ships un-assembled with all tools included and takes 30 - 45 minutes to put together.NOTE: Rack shown is the PBR-5T (five tier).Learn More
-
4 Tier Book Rack (PBR-4T)$179.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. A steel slider divider on each of the 4 tiers keeps your books in place. Three rods per tier can be used to store and display magazines. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). This rack ships un-assembled with all tools included and takes 20 - 30 minutes to put together.NOTE: Rack shown is the PBR-5T (five tier).Learn More
-
LP Record Storage Rack (4 Shelves)$859.00
This four-shelf unit will store big collections of LPs, books, Laser Discs, or use it as an amazing display shelving unit. Each shelf will hold 200lbs (180 LPs). Additional shelves may be purchased separately and easily added on at a later date. Add front uprights to sort and separate your collection. Choose our optional casters for ease of mobility (please note the 625lbs weight limit of casters). Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.
Learn More -
LP Record Storage Rack (3 Shelves)$679.00
This three-shelf unit is a great solid shelving unit that is ready to be loaded with LPs, books, Laser Discs and looks especially good when placed in a bedroom with a Boltz Bed as display shelving! Each shelf will hold 200lbs (180 LPs). Additional shelves may be purchased separately and easily added on at a later date. Add front uprights to to sort and separate your collection. Choose our optional casters for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for anything you put on them.
Learn More -
LP Record Storage Rack (2 Shelves)$499.00
This two-shelf unit is perfect for larger collections of LPs, books, Laser Discs, or as display shelving. Each shelf will hold 200lbs (180 LPs), serving as a high capacity storage solution for those with minimal vertical space. Additional shelves may be purchased and easily added on at a later date.
Learn More
Add front uprights to sort and separate your collection. Choose our optional casters for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection. -
LP Record Storage Rack (1 Shelf)$319.00
This single shelf unit will hold 200lbs (180 LPs ). A great package for those with a small collection of LPs, books, Laser Discs or for display shelving. Additional shelves may be purchased and easily added on at a later date. Add front uprights to sort and separate your collection. Choose our optional casters for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.
Learn More -
Blu-ray Disc Floor Rack & Shelving (BD-392)$289.00Designed specifically for this new media format, the BD-392 holds up to 49 blu-ray discs on each of its 8 tiers. The solid steel construction and incredible powder coat finish create a multimedia rack that is as strong as it is beautiful. Individual slider dividers on each of the 8 tiers allow you to organize or categorize your media library. Stabilizer feet and wall support brackets are included (not required, but can be used independently or both). Ships unassembled and takes 30 - 45 minutes to put together.NOTE: The item pictured is a "sister" product, the 7-tier MM-252, which can also store DVDs.Learn More
-
Canopy Steel Bed Frame$1,399.00Already a customer favorite, our steel canopy bed brame is in a league of its own. Unlike most other canopy beds, there are no screws, brackets, or clamps that will wear out or break. Simply slide the top side bars into place between the headboard and footboard - the friction sets into place using the same insta-couplers that are used to hold in the bottom rails. Assembly takes minutes, and the connections are so strong you can swing on the rails - really.Handmade from 2" steel, the thick frame creates a unique, modern style that is sophisticated, yet simple. Assembly is easy and can be done by one person (although easier with two) in about 15 minutes with no tools. All beds include headboard, footboard, two side rails, two top connecting bars and 5 slats, one of which has an adjustable 5th point leg (all slats ship in black finish).Mattress and box spring not included. Brushed Steel Finish shown on bed pictured here.All of our beds can be custom made in Stainless Steel. Call us today at 501-679-7800 for a quote!
Click to View our Latest Canopy Bed Design - The Diamond Canopy
Learn More -
Shelving Back Plate for LP Record Storage Rack$19.00FOR LP-3612 ONLY, will NOT fit LP-2012SOLD INDIVIDUALLY. Please select your quantity below.
You asked for it, and now we have it. A back stop for your LP Shelving that will keep all your records, books, and laser discs from going out the back of our shelving. This back stop is very simple to add to existing shelving, or when assembling a new set. You simply remove the bolts from the 1" back uprights, put the fitted tabs of the back plate over the screws, then tighten the bolts back down over the tabs. Assembly takes just minutes, and you won't have to take apart your shelving to put them on! The back stop goes from end to end, and does not interfere with the 12" depth of the shelves. Each back stop comes with a set of long bolts that can be used if using on a base (because the base used short bolts, you will have to replace them with the longer bolts).Shown in Anthracite Metallic Finish. Learn More -
LP Album Storage Rack (4 Shelves)$719.00This three shelf unit will hold 275lbs (or up to 90 LPs ) per shelf. Perfect for those with limited space or medium sized collections of LPs, books, or Laser Discs. Also great for use as display or pantry shelving. Additional shelves may be purchased separately and easily added on at a later date. Optional casters can also be added for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.Learn More
-
LP Album Storage Rack (3 Shelves)$569.00This three shelf unit will hold 275lbs (or up to 90 LPs ) per shelf. Perfect for those with limited space or medium sized collections of LPs, books, or Laser Discs. Also great for use as display or pantry shelving. Additional shelves may be purchased separately and easily added on at a later date. Optional casters can also be added for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.Learn More
-
LP Album Storage Rack (2 Shelves)$419.00
This two shelf unit will hold 275lbs (or up to 90 LPs ) per shelf. A perfect start for those with a small collection of LPs, books, Laser Discs. Also great for use as display shelving. Additional shelves may be purchased separately and easily added on at a later date. Optional casters can also be added for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.
Learn More -
LP Album Storage Rack (1 Shelf)$269.00
This one shelf unit will hold 200lbs or up to 90 LPs . A perfect start for those with a small collection of LPs, books, Laser Discs. Additional shelves may be purchased separately and easily added on at a later date. Optional casters can also be added for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.
Learn More -
Diamond Canopy Steel Bed Frame$1,499.00A twist on our traditional Canopy Bed, the Diamond Canopy has its frame turned from a standard 90 degrees to 45 degrees, so the tube pieces appear in a diamond shaped pattern, including the canopy rails. Boltz beds are in a league of their own, with no screws, brackets, or clamps that will wear out or break. Simply slide all the bars into place between the headboard and footboard - the friction sets into place using the same insta-couplers that are used to hold in the bottom rails. The connections are so strong you can swing on the rails - really. Handmade from 2" steel, the thick frame creates a unique modern style that is sophisticated, yet simple. Assembly is easy and can be done by one person (although easier with 2) in about 20 minutes with no tools. All beds include headboard, footboard, two side rails, two top connecting bars and 5 slats, one of which has an adjustable 5th point leg (all slats ship in black finish). Your bed is tested prior to shipment to confirm the absolute fit of all parts. Mattress and box spring not included. We suggest measuring your mattress before ordering to ensure that our bed sizes will work for you. Brushed Steel Finish shown on bed pictured here. Click here to view the Original Boltz Steel Canopy Bed Learn More
-
Round Spindle Steel Bed Frame$969.00
A softer approach to the traditional Mission Spindle Bed, this design uses 2" round steel for the frame with 1" round spindles for the headboard and footboard. The thick steel frame creates a unique modern style that is sophisticated, and can be quite whimsical depending on your color choice, yet simple and complimentary to any decor.
Learn More
Assembly is easy and can be done by one person (though easier with two people) in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 5 slats (all slats ship in black finish), one of which has an adjustable 5th point leg. Mattress and box spring not included. Razz Sparkle finish shown on bed pictured here. -
Zen Steel Bed Frame$859.00This design, inspired by a Zen Garden, has a classic Asian flare combined with the strength and style of Boltz. Handmade from 2" steel, this is sure to be the most well constructed, and perhaps the best looking, bed you will ever own. The thick steel frame creates a unique modern style that is sophisticated, yet simple.Learn More
Assembly is easy and can be done by one person in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 5 slats, one of which has an adjustable 5th point leg (all slats ship in black finish). Mattress and box springs not included. Aged Copper finish shown on bed pictured here.
All of our beds can be custom made in Stainless Steel. Call us today at 501-679-7800 for a quote! -
Platform Steel Bed Frame$1,069.00This frame is Boltz Furniture's first platform bed, and we think it turned out quite nice. Platform beds are made to be used with a mattress only, no box springs. Our platform bed is handmade, with thick 2" steel all around. This is sure to be the most well constructed, not to mention the best looking, bed you will ever own. The steel frame creates a unique modern style that is sophisticated, yet simple.Learn More
Assembly is easy and can be done by one person in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 10 slats, two of which have adjustable 5th point legs (all slats ship in black finish) that form the platform for your mattress. Mattress not included. Brushed Steel finish shown on bed pictured here.
All of our beds can be custom made in Stainless Steel. Call us today at 501-679-7800 for a quote! -
Spindle Steel Bed Frame$1,069.00Handmade using 2" steel for the frame with 1" spindles in the headboard and footboard, this is sure to be the most well constructed, and probably the best looking, bed you will ever own. The thick steel frame creates a unique modern style that is sophisticated, yet simple and can be accented to compliment any decor.Learn More
Assembly is easy and can be done by one person in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 5 slats (all slats ship in black finish) one of which has an adjustable 5th point leg. Mattress and box spring not included. Black Matte finish shown on bed pictured here. -
Classic Boltz Bed Frame$859.00An instant classic. Handmade from 2" steel, this is sure to be the most well constructed, not to mention the best looking, bed you will ever own. The thick steel frame creates an elegant, modern style that goes with any decor. Assembly is easy and can be done by one person in about 5 minutes with no tools. All beds include headboard, footboard, side rails and 5 black steel slats, one of which has an adjustable 5th point leg attached. Mattress and box springs not included. Note: Add $125 for Brushed Steel Finish All of our beds can be custom made in Stainless Steel. Call us today at 501-679-7800 for a quote! Learn More
-
Architect Steel Bed Frame$969.00A geometric twist on the classic Boltz Bed. Handmade from 2" steel, this is sure to be the most well constructed, not to mention the best looking, bed you will ever own. The thick steel frame creates a unique modern style that is sophisticated, yet simple. Assembly is easy and can be done by one person in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 5 slats, one of which has an adjustable 5th point leg (all slats ship in black finish). Mattress and box springs not included. Brushed Steel Finish shown on bed pictured here. Learn More
-
5 Shelf Modular Steel Bookcase$299.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. These steel bookcases are designed to become a centerpiece of organization for your living and/or work spaces. Patterned after our highly acclaimed media racks, the five steel rods per tier (and two rear rods) create the shelf, so books can be stored vertically or horizontally, supporting up to 150lbs per shelf (evenly distributed) without deflection. Wall brackets are included (not required, but provide additional stability), as well as plastic floor protectors for the bottoms of each side panel.The bookcase is infinitely expandable with additional 5-shelf expansion kits. Both the bookcase and expansion kits are available in 24" or 12" widths for maximum space flexibility. The bookcase ships un-assembled with all tools included. Allow approximately 30 - 45 minutes for assembly.Learn More
-
D14 Bar Cart$999.00Multipurpose bar cart. Use in Kitchen, Dining Area or Living Room. Recommend Casters for easy transport from room to room. Learn More
-
20 Shelf Modular Steel Bookcase$899.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. These steel bookcases are designed to become a centerpiece of organization for your living and/or work spaces. Patterned after our highly acclaimed media racks, the five steel rods per tier (and two rear rods) create the shelf, so books can be stored vertically or horizontally, supporting up to 150lbs per shelf (evenly distributed) without deflection. Wall brackets are included (not required, but provide additional stability), as well as plastic floor protectors for the bottoms of each side panel.This item includes one 5-shelf (24"W) bookcase with three 5-shelf (24"W) expansion kits. It is infinitely expandable with additional 5-shelf expansion kits. Both the bookcase and expansion kits ship un-assembled with all tools included. Allow approximately 60 - 90 minutes for assembly.Learn More
-
15 Shelf Modular Steel Bookcase$699.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. These steel bookcases are designed to become a centerpiece of organization for your living and/or work spaces. Patterned after our highly acclaimed media racks, the five steel rods per tier (and two rear rods) create the shelf, so books can be stored vertically or horizontally, supporting up to 150lbs per shelf (evenly distributed) without deflection. Wall brackets are included (not required, but provide additional stability), as well as plastic floor protectors for the bottoms of each side panel.This item includes one 5-shelf (24"W) bookcase with two 5-shelf (24"W) expansion kits. It is infinitely expandable with additional 5-shelf expansion kits. Both the bookcase and expansion kits ship un-assembled with all tools included. Allow approximately 45 - 60 minutes for assembly.Learn More
-
10 Shelf Modular Steel Bookcase$499.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. These steel bookcases are designed to become a centerpiece of organization for your living and/or work spaces. Patterned after our highly acclaimed media racks, the five steel rods per tier (and two rear rods) create the shelf, so books can be stored vertically or horizontally, supporting up to 150lbs per shelf (evenly distributed) without deflection. Wall brackets are included (not required, but provide additional stability), as well as plastic floor protectors for the bottoms of each side panel.This item includes one 5-shelf (24"W) bookcase with one 5-shelf (24"W) expansion kit. It is infinitely expandable with additional 5-shelf expansion kits. Both the bookcase and expansion kit ship un-assembled with all tools included. Allow approximately 45 - 60 minutes for assembly.Learn More
-
Steel & Glass TV / LCD / Plasma Stand (Denver-P12)$649.00
Each one of our TV Tables are built by hand from welded 1½" steel tubing with 3/8" glass shelves. The long sleek lines of this table offer a contemporary look that goes with any decor. The 48" width can accommodate large displays (including most 70" sets) and is perfect for todays' generation of HDTV/PLASMA/LCD/DLP sets. And of course, it is built to hold a lot of weight. With the dual midframe supports, the top shelf can easily handle up to 300lbs. The second shelf has room for several components or center channel speaker.
Learn More -
Steel & Glass TV / LCD / Plasma Stand (Seattle)$1,069.00
This unique TV Table combines 2" and 1" steel with heavy ½" thick glass shelves to create a contemporary look. The 67" width can accommodate large displays (including most 70" sets) and is perfect for today's generation of large HDTV / PLASMA / LCD sets. And of course, it is built to hold a lot of weight. With the dual midframe supports, each shelf can easily handle up to 300lbs. The second shelf has room for several components or center channel speaker.
Learn More -
Steel & Glass TV / LCD / Plasma Stand (Telluride)$1,819.00
This amazing A/V unit is a showcase for your TV and components. Handmade from massive 2" steel and finished with three pieces of ½" thick glass, it is as strong as it is beautiful. The top piece of glass insets into the top, the second shelf holds 4 - 6 components with room for a center chanel speaker, and the cubby at the bottom is perfect for your heavy receiver, with a midframe support underneath. Completed with the powdercoat finish of your choice to make a Plasma/LCD stand that is as strong as it is beautiful. Exclusively at Boltz.com.
Learn More -
3 Piece TV / LCD / Plasma Stand and Audio Video Tables$1,179.00
This 3 piece Plasma/LCD Stand grouping consists of our 3 glass plasma stand, and two A/V caddies. Each piece is individually crafted in the USA. 3/8" thick glass shelves are inset flush with the steel, and float on 1" square blocks of solid steel. The 3 glass stand can accommodate up to a 70" plasma or LCD display and will support up to 500lbs spread evenly across the entire top. The A/V caddies include 2 floating glass shelves which can hold up to 150lbs each and have plenty of room for two components on each shelf. Add casters to the caddies for ease of mobility.
Learn More -
Pair of Uprights$29.00
LP Record Storage Rack Sold Separately
Learn More
Add a pair of front uprights to your shelves to keep your LPs, Books, Laser Discs, or other items in place. These uprights are identical to the back supports, but instead of bolting in, these simply slide snugly into place. They come with a slim pad for the top and bottom to keep them from scratching the surface of your shelves. -
4 Shelf Steel & Glass Component Stand$549.00
This 4 shelf Loft Series Component Stand is hand crafted from solid steel, then finished with the powdercoat color of your choice for a finish that is as beautiful as it is strong. The outer frame is made from thick 1½" steel while the shelves are a slinder ½" giving them a floating look. Each shelf has a piece of 3/8" thick glass that is suspended above it by rubber bumpers. The bumpers have adhesive backs to keep them in place, and provide isolation for the glass shelf that will prevent vibrations through the stand. Add optional locking casters to easily move the unit when you need to clean or re-configure your components! Note: Add $75 for Brushed Steel Finish.
Learn More -
3 Shelf Steel & Glass Component Stand$439.00
This 3 shelf Loft Series Component Stand is hand crafted from solid steel, then finished with the powdercoat color of your choice for a finish that is as beautiful as it is strong. The outer frame is made from thick 1½" steel while the shelves are a slender ½" giving them a floating look. Each shelf has a piece of 3/8" thick glass that is suspended above it by rubber bumpers. The bumpers have adhesive backs to keep them in place, and provide isolation for the glass shelf that will prevent vibrations through the stand. Add optional locking casters to easily move the unit when you need to clean or re-configure your components! Note: Add $100 for Brushed Steel Finish.
Learn More -
Audio Video Component Stand (CS4)$649.00
Keep all your components safe and secure on this 4 shelf component stand. Includes a base and 3 shelves that can be assembled in any order to suit your needs. This is a heavy duty stand, made in the USA from 100% solid steel, which is then painted with an incredibly durable powder coat finish. The unique Boltz design creates a signature showcase for your components and allows air to flow freely, preventing your equipment from overheating. Add optional casters for ease of mobility (casters add 4" to height of stand). Specifications: Overall outer dimensions: 24"W - 22"D - 34"H | Top Shelf: 24"W - 22"D | All other shelves: 24"W - 22"D. Interior available area: 19-1/4"W - 20"D | 1st shelf: 7"H (6½"H usable) | 2nd shelf: 10"H (9½"H usable) | 3rd shelf: 14"H (13½"H usable). Shelves can be assembled in any order. Optional casters add 4" to height.
Learn More -
5 Shelf Modular Steel Bookcase in Black Matte$319.00Made in the USA from 100% steel then painted with an incredibly durable powder coat finish. These steel bookcases are designed to become a centerpiece of organization for your living and/or work spaces. Patterned after our highly acclaimed media racks, the five steel rods per tier (and two rear rods) create the shelf, so books can be stored vertically or horizontally, supporting up to 150 lbs per shelf (evenly distributed) without deflection. Wall brackets are included (not required, but provide additional stability), as well as plastic floor protectors for the bottoms of each side panel.The bookcase is infinitely expandable with additional 5-shelf expansion kits. Both the bookcase and expansion kits are available in 24" or 12" widths for maximum space flexibility. The bookcase ships un-assembled with all tools included. Allow approximately 30 - 45 minutes for assembly.Learn More
-
Stainless Steel Platform Bed$2,549.00Our first platform bed with the strength and beauty of a 100% stainless steel frame. Platform beds are made to be used with a mattress only, no box spring. Our stainless steel platform bed is handmade, with thick 2" steel all around. This is sure to be the most well constructed, not to mention the best looking, bed you will ever own. The stainless steel frame creates a unique modern style that is sophisticated, yet simple.Learn More
Assembly is easy and can be done by one person in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 10 slats, two of which have adjustable 5th point legs (all slats ship in black finish) that form the platform for your mattress. Mattress not included. -
14" Steel Component Shelf$189.00
Add a fourteen-inch shelf package to your custom configured component stand. The shelf package includes two side panels, a back panel, a shelf, cord collector bracket and all necessary hardware for assembly. The fourteen-inch shelf will give you an interior usable area of 19-1/4"W x 13½"H x 21"D. The outer shelf dimensions are 24"W x 14"H x 22"D.
Learn More -
10" Steel Component Shelf$179.00
Add a ten-inch shelf package to your custom configured component stand. The shelf package includes two side panels, a back panel, a shelf, cord collector bracket and all necessary hardware for assembly. The 10" shelf will give you an interior usable area of 19-1/4"W x 9½"H x 21"D. The outer shelf dimensions are 24"W x 10"H x 22"D.
Learn More -
7" Steel Component Shelf$169.00
Add a seven-inch shelf package to your custom configured component stand. The shelf package includes two side panels, a back panel, a shelf, cord collector bracket and all necessary hardware for assembly. The seven-inch shelf will give you an interior usable area of 19-1/4"W x 6½"H x 21"D. The outer shelf dimensions are 24"W x 7"H x 22"D.
Learn More -
Steel Component Stand Base$129.00
Begin building your own custom configured component stand with a base. The base gives a sturdy foundation to add shelf packages. Optional casters may be added at any time. The base measures 24"W x 3"H x 22"D.
Learn More -
Loft 3 Piece Office Set$1,399.00
Save on this 3 piece set! This classic loft style is sure to infuse your work space with style and creativity. The Loft Desk has an oversized glass top (36x60") that sits on the steel frame.Set includes: $599 - Steel & Glass Loft Desk | $399 - Side/Phone Table | $699 - Boltz 3-Drawer Pedestal File Cabinet________$1,697 Total if purchased individually________- $298 DISCOUNT (18%)________$1,399 - 3 PIECE OFFICE TOTAL
Learn More
