Search results for: 'tv stand'

This 3 shelf Loft Series Component Stand is hand crafted from solid steel, then finished with the powdercoat color of your choice for a finish that is as beautiful as it is strong. The outer frame is made from thick 1½" steel while the shelves are a slender ½" giving them a floating look. Each shelf has a piece of 3/8" thick glass that is suspended above it by rubber bumpers. The bumpers have adhesive backs to keep them in place, and provide isolation for the glass shelf that will prevent vibrations through the stand. Add optional locking casters to easily move the unit when you need to clean or re-configure your components! ADD A SHELF: Use the dropdown boxes below to add 1 or 2 more shelves! Each shelf will be exactly the same size and have 9.25" of useable height between shelves. Note: Add $150 for Brushed Steel Finish.

Learn More

This beautiful 5 Tier A/V Tower is built from welded 1½" steel tubing and has 5 glass shelves that are 3/8" thick. Perfect as companions for our TV Table, or to go with big screen TVs. They also make unique display shelving to go anywhere in your home. All towers are made by hand and have a sleek, comtemporary look that goes with any decor. 1st, 3rd, and 4th shelf will hold up to 80lbs. 2nd and bottom shelves which hold up to 180lbs because of the added midframe supports. Towers have the following usable space on each shelf: 11" on second shelf - 10" on third - 15½" on fourth - 6½" on fifth. Cord management bolts onto the back and can be left off if desired. Sold individually.

Learn More

Thin is in, and our Plasma Stands are built to hold todays' generation of increasingly thinner plasma displays.This Plasma Stand and A/V caddy combo are built by hand from 1½" steel tube and are finished with 3/8" thick floating glass shelves. The stand can easily hold 80lbs and accommodate up to a 50" display. The A/V caddy can be set under or beside the stand to best suit your home theater setup and will hold 2-4 components. Each shelf on the Caddy will hold up to 150lbs. Add casters to the caddy for ease of mobility.

Learn More

This 7 shelf Loft Series Component Stand is hand crafted from solid steel, then finished with the powdercoat color of your choice for a finish that is as beautiful as it is strong. The outer frame is made from thick 1½" steel while the shelves are a slender 1/2" giving them a floating look. Each shelf has a piece of 3/8" thick glass that is suspended above it by rubber bumpers. The bumpers have adhesive backs to keep them in place, and provide isolation for the glass shelf that will prevent vibrations through the stand.

Learn More

This 30" high plasma stand is built by hand from 1½" steel tube and is finished with a floating 3/8" thick inset glass top. The stand can easily accommodate up to a 50" display. The long clean lines of this furniture create a unique, flexible style that goes with any decor. Add an equipment caddy to store components under or beside the stand.

Learn More

This 24" high plasma stand is built by hand from 1½" steel tube and is finished with a floating 3/8" thick inset glass top. The stand can easily accommodate up to a 50" display. The long clean lines of this furniture create a unique, flexible style that goes with any decor. Add an equipment caddy to store components under or beside the stand.

Learn More

This 3 piece Plasma/LCD Stand grouping consists of our 3 glass plasma stand, and two A/V caddies. Each piece is individually crafted in the USA. 3/8" thick glass shelves are inset flush with the steel, and float on 1" square blocks of solid steel. The 3 glass stand can accommodate up to a 70" plasma or LCD display and will support up to 500lbs spread evenly across the entire top. The A/V caddies include 2 floating glass shelves which can hold up to 150lbs each and have plenty of room for two components on each shelf. Add casters to the caddies for ease of mobility.

Learn More

Perfect for printers, fax machines, or scanners. Or, create new ways to use it! (The boss puts his monitor and key board on it). This hand crafted equipment stand is made from 1½" steel tube and has two shelves of floating 3/8" thick glass. Add optional casters for ease of mobility. Usable space between shelves: 15½". Usable distance between bottom shelf and ground: 11½" (without casters - optional casters add 2½" to height). An elegant addition to any office environment.

Learn More

Our Standard Architect Desk is a simple and elgant choice for any office. It has the signature rectangle in the top, and matches all the other Architect furniture perfectly. The large 36" x 60" glass top gives you a large work surface. Made from 2" thick steel, this desk is as beautiful as it is solid. Each piece of our furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship.

Learn More

This 4 shelf Loft Series Component Stand is hand crafted from solid steel, then finished with the powdercoat color of your choice for a finish that is as beautiful as it is strong. The outer frame is made from thick 1½" steel while the shelves are a slinder ½" giving them a floating look. Each shelf has a piece of 3/8" thick glass that is suspended above it by rubber bumpers. The bumpers have adhesive backs to keep them in place, and provide isolation for the glass shelf that will prevent vibrations through the stand. Add optional locking casters to easily move the unit when you need to clean or re-configure your components! Note: Add $75 for Brushed Steel Finish.

Learn More

This 3 shelf Loft Series Component Stand is hand crafted from solid steel, then finished with the powdercoat color of your choice for a finish that is as beautiful as it is strong. The outer frame is made from thick 1½" steel while the shelves are a slender ½" giving them a floating look. Each shelf has a piece of 3/8" thick glass that is suspended above it by rubber bumpers. The bumpers have adhesive backs to keep them in place, and provide isolation for the glass shelf that will prevent vibrations through the stand. Add optional locking casters to easily move the unit when you need to clean or re-configure your components! Note: Add $100 for Brushed Steel Finish.

Learn More

Great for narrow areas with nine 9" deep shelves. Learn More

Each one of our TV Tables are built by hand from welded 1½" steel tubing with 3/8" glass shelves. The long sleek lines of this table offer a contemporary look that goes with any decor. The 48" width can accommodate large displays (including most 70" sets) and is perfect for todays' generation of HDTV/PLASMA/LCD/DLP sets. And of course, it is built to hold a lot of weight. With the dual midframe supports, the top shelf can easily handle up to 300lbs. The second shelf has room for several components or center channel speaker.

Learn More

This unique TV Table combines 2" and 1" steel with heavy ½" thick glass shelves to create a contemporary look. The 67" width can accommodate large displays (including most 70" sets) and is perfect for today's generation of large HDTV / PLASMA / LCD sets. And of course, it is built to hold a lot of weight. With the dual midframe supports, each shelf can easily handle up to 300lbs. The second shelf has room for several components or center channel speaker.

Learn More

This amazing A/V unit is a showcase for your TV and components. Handmade from massive 2" steel and finished with three pieces of ½" thick glass, it is as strong as it is beautiful. The top piece of glass insets into the top, the second shelf holds 4 - 6 components with room for a center chanel speaker, and the cubby at the bottom is perfect for your heavy receiver, with a midframe support underneath. Completed with the powdercoat finish of your choice to make a Plasma/LCD stand that is as strong as it is beautiful. Exclusively at Boltz.com.

Learn More

Keep all your components safe and secure on this 4 shelf component stand. Includes a base and 3 shelves that can be assembled in any order to suit your needs. This is a heavy duty stand, made in the USA from 100% solid steel, which is then painted with an incredibly durable powder coat finish. The unique Boltz design creates a signature showcase for your components and allows air to flow freely, preventing your equipment from overheating. Add optional casters for ease of mobility (casters add 4" to height of stand). Specifications: Overall outer dimensions: 24"W - 22"D - 34"H | Top Shelf: 24"W - 22"D | All other shelves: 24"W - 22"D. Interior available area: 19-1/4"W - 20"D | 1st shelf: 7"H (6½"H usable) | 2nd shelf: 10"H (9½"H usable) | 3rd shelf: 14"H (13½"H usable). Shelves can be assembled in any order. Optional casters add 4" to height.

Learn More

A modern chic approach for large screen mega TVs! The JW UltraMedia TV Stand can be used for mega sized (up to 80 inch) televisions. The stand is light weight and boasts beautiful lines and shapes. Top shelf weight capacity is 300lbs Lower shelf weight capacity is 100lbs each. Learn More

Dimensions: 60"W - 26"D - 51"H (excluding casters) Also compatible with MOST curved TVs Learn More

Begin building your own custom configured component stand with a base. The base gives a sturdy foundation to add shelf packages. Optional casters may be added at any time. The base measures 24"W x 3"H x 22"D.

Learn More

The Diamond Side Table is a simple but elegant, a perfect complement to the Diamond Canopy Bed, or as a stand-alone showpiece. We create its unique diamond shape by turning the standard 90 degrees to 45 degrees, and carry the design into the top diamond steel inset. Like all Boltz Steel furniture pieces, this modern table is made from heavy-duty steel to create amazing furniture that can go perfectly with all of your Boltz Steel products, or incorporated into your existing decor. Each piece is welded by hand, and then powder coated to last a lifetime. Learn More

This 3 Glass Plasma/LCD Stand is built by hand from 1½" steel tube with 3 panels of 3/8" thick floating glass inset into the top. The perfect stand for up to a 70" display, and at 21" deep, can handle the large bases of the bigger plama and LCD displays. The long clean lines of this stand create a classic, subdued style that goes with almost any decor. With two midframe supports, this stand can hold up to 400lbs spread evenly across the entire top. Add the large A/V Caddies for component storage.

Learn More

A twist on our traditional Canopy Bed, the Diamond Canopy has its frame turned from a standard 90 degrees to 45 degrees, so the tube pieces appear in a diamond shaped pattern, including the canopy rails. Boltz beds are in a league of their own, with no screws, brackets, or clamps that will wear out or break. Simply slide all the bars into place between the headboard and footboard - the friction sets into place using the same insta-couplers that are used to hold in the bottom rails. The connections are so strong you can swing on the rails - really. Handmade from 2" steel, the thick frame creates a unique modern style that is sophisticated, yet simple. Assembly is easy and can be done by one person (although easier with 2) in about 20 minutes with no tools. All beds include headboard, footboard, two side rails, two top connecting bars and 5 slats, one of which has an adjustable 5th point leg (all slats ship in black finish). Your bed is tested prior to shipment to confirm the absolute fit of all parts. Mattress and box spring not included. We suggest measuring your mattress before ordering to ensure that our bed sizes will work for you. Brushed Steel Finish shown on bed pictured here. Click here to view the Original Boltz Steel Canopy Bed Learn More

This over sized rectangular accent table can be used in the bedroom as night stand, living room area or even as a coffee table. 17" between top and lower 1/2" tube frame shelf. Learn More

The J. Arthur White Collection represents artisan furniture in a modern, contemporary style. Each piece is hand crafted and finished by one of our 3 master welders, who have over 80 years of combined experience making high quality, unique creations. Made from 2" and 1½" thick steel, no two pieces are exactly alike, making each table as much a work of art as they are unique, beautiful furniture.

Learn More

No two pieces are alike. Everything is custom made to order. Complete the look of your office for those of you who have the BOLTZ desks and office credenzas. Learn More

Learn More

A geometric twist on the classic Boltz Bed. Handmade from 2" steel, this is sure to be the most well constructed, not to mention the best looking, bed you will ever own. The thick steel frame creates a unique modern style that is sophisticated, yet simple. Assembly is easy and can be done by one person in about 15 minutes with no tools. All beds include headboard, footboard, side rails and 5 slats, one of which has an adjustable 5th point leg (all slats ship in black finish). Mattress and box springs not included. Brushed Steel Finish shown on bed pictured here. Learn More

This classic parsons style handmade frame is fully welded and built to last forever. Once out of the carton there is nothing to assemble. The ½” thick glass top (60” wide x 36” deep) provides for plenty of work space. Standard desk height is 30”. Call us should you require a different dimension, we can normally accommodate changes for little or no cost. Allow 2 weeks for manufacturing, powder coat finishing (matte black is our standard finish) and another week for delivery in the continental U.S. Sorry we do not ship this item internationally. For the chic at heart, select our brushed steel finish option - you’ll be able to enjoy the handcrafted sanded steel look underneath the clear powder coat finish.

Learn More

For ease of mobility, add these 4 heavy duty casters to your order. The non marking rubber wheels are perfect for almost any floor surface including hardwood, carpet, tile, etc. Casters will increase the height of your product by 3-3/4". Includes a matched set of 2 locking and 2 non-locking casters. NOTE: Locking casters can not be combined with our old style non-locking casters because of a quarter inch height difference.

Please, always use caution when moving heavy stands on casters and never exceed the maximum capacity of 500 lbs. Note: If adding casters to an older Boltz TV stand, be sure the base has a flange with holes underneath.

Learn More

Cart Dimensions: 38"W - 22"D - 51"H (excluding casters) Compatible with MOST curved TVs Learn More

Cart Dimensions: 48"W - 22"D - 51"H (excluding casters) Compatible with MOST curved TVs Learn More

Very versatile two shelf cabinet is part of the new Design13 Series by Boltz. Can be used in various rooms of your home or office. Media storage, end table, bed night stand... Another versatile designed and manufactured by Boltz. Learn More

Dimensions: 48"W - 26"D - 51"H (excluding casters) Compatible with MOST curved TVs Learn More

No two pieces are alike. Everything is custom made to order. Complete the look of your office, for those of you who have the BOLTZ desks and office credenzas. Learn More

No two pieces are alike. Everything is custom made to order. Complete the look of your office for those of you who have the BOLTZ desks and office credenzas. Learn More

Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. This bookcase is 15" x 51" and comes with 3 inset glass shelves. The sides have ornamental ½" steel slats that are the signature of this piece. Perfect for storage, office materials, or for you personal touches. Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship.

Learn More

This Large A/V Caddy was specifically designed to accent our 30" high Plasma Stands. It is a two shelf caddy that is hand welded from 1½" steel tube and has 3/8" thick glass on each shelf. Mix and match with any of our Home Theater Furniture to create you own custom set up. Add casters to any of our A/V caddies for ease of mobility. Casters add 2½" to height.

Learn More

SAVE OVER 20%!

If it's modern chic that your looking for, then our 7 piece Loft Office can have you completely styled out with shelving, plenty of desk space, and storage galore. We like the way the different heights of the components work together to make for a unique, yet functional combination. $599 - Steel & Glass Loft Desk | $399 - Side/Phone Table | $299 - Printer/Fax Stand | $599 - 3 Glass Credenza | $799 - 4 Tier Shelving | $899 - Boltz Lateral File Cabinet | $699 - Boltz 3-Drawer Pedestal File Cabinet________________________$4,293 Total if purchased individually____________________- $994 DISCOUNT (23%)____________________$3,299 - 7 PIECE OFFICE TOTAL

Learn More

The Tri-Top table continues the BOLTZ tradition of welded metal tables that combine true craftsmanship with modern design. The Tri-Top is available in all BOLTZ tube finishes, and can be easily CUSTOMIZABLE. Call 501.679.7800 for custom orders! Learn More

Introducing our favorite welded table to date! The 5 Tri-Console Table is a stunning combination of the craftsmanship that sets Boltz furniture apart and the modern design that we are known for. Our steel and glass console table is available in all Boltz finishes. Call us at 501.679.7800 for custom designs. Learn More

The Laptop Desk is built by hand from 1½" steel tube and is finished with a floating 3/8" thick inset glass top. The desk can easily accommodate a PC/laptop/notebook computer with additional workspace. The long clean lines of this piece create a unique, flexible style that goes with any décor. Available with optional casters, e-mail sales@boltz.com or call us for details.

Learn More

The versatile CD-600x4 holds 2400 CDs on its own or can be expanded to epic proportions, housing even the most prolific audiophile's collection with ease. Each tier has a slider divider for easy CD management. Ships with stablizer feet and wall support brackets (not required, but can be used independently or both). Includes one unassembled CD-600 and three unassembled tall expansion kits.

Learn More

The versatile CD-600x3 holds 1800 CDs on its own or can be expanded to epic proportions, housing even the most prolific audiophile's collection with ease. Each tier has a slider divider for easy CD management. Ships with stabilizer feet and wall support brackets (not required, but can be used independently or both). Includes one unassembled CD-600 and two unassembled tall expansion kits.

Learn More

The versatile CD-600x2 holds 1200 CDs on its own or can be expanded to epic proportions, housing even the most prolific audiophile's collection with ease. Each tier has a slider divider for easy CD management. Ships with stabilizer feet and wall support brackets (not required, but can be used independently or both). Includes one unassembled CD-600 and one unassembled tall expansion kit.

Learn More

Learn More

Learn More

The Laptop Desk is built by hand from 1½" steel tube and is finished with a floating 3/8" thick inset glass top. The desk can easily accommodate a PC/laptop/notebook computer with additional workspace. The long clean lines of this piece create a unique, flexible style that goes with any decor. Available with optional casters, e-mail sales@boltz.com or call us for details.

Learn More

Save $545 on this 6 piece set! Purchased separately, these pieces would cost $3044. The set includes our Studio Series Desk, Side Table, 3 Glass Credenza, 3 Shelf Bookcase, and the Pedestal & Lateral File cabinets from HON. Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. The desk and side table come with casters, which include 2 locking and 2 non-locking casters per set. Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship.

Learn More

Save $148 on this 3 piece set! Purchased separately, these pieces would cost $1,447. The set includes our Studio Series Desk, Side Table, & The Pedestal File Cabinet from HON. Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. The desk and side table come with casters, which include 2 locking and 2 non-locking casters per set. Each piece of our office furniture is made and finished by hand in our facilities, which ensures that every unit carries the Boltz high standards of quality and craftsmanship.

Learn More

Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. This compact mobile desk is 24" x 48" and comes with a 3/8" thick glass top that sits on top and goes edge to edge. Every desk comes on wheels, which include 2 locking and 2 non-locking casters per set. The overall height of the desk including the casters is 30". Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship.

Learn More

Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. The Studio Collection Side Table is 21" x 23" and comes with inset glass for the top shelf. The bottom shelf is made from ½" steel slats and is the perfect height for most computers to sit on. This table comes on wheels, which include 2 locking and 2 non-locking casters per set. The overall height of the table including the casters is 30". Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship.

Learn More

This Small A/V Caddy was specifically designed to accent our 24" high Plasma Stands. It is a two shelf caddy that is hand welded from 1½" steel tube and has 3/8" thick glass on each shelf. Mix and match with any of our Home Theater Furniture to create you own custom set up. Add casters to any of our A/V caddies for ease of mobility. Casters add 2½" to height.

Learn More

The Architect Series is our most unique office furniture to date. This Credenza frame is hand made from massive 2" thick steel tube which gives the desk an elegant and sophisticated presence. We used 2" and 1½" steel to make the rectangles in the top, with the center piece being larger than the other two. A perfect match for the Architect Desk, these pieces are the strongest, and in our opinion best looking, office furniture you can find anywhere. The credenza is hand finished and the powder coat of your choice is applied. The glass top is 20" x 66" and is 3/8" thick .

Learn More

The Architect Series is our most unique office furniture to date. This bookcase frame is hand made from massive 2" thick steel tube which gives the desk an elegant and sophisticated presence. We used 1½" steel for the distinctive Architect rectagle, and ½" steel for the side rails which gives the piece a sleek and open feel. The side rails are 7½" apart on center, except for the 1st and 2nd shelf which are 6½" apart on center. The bookcase comes with 4 pieces of glass that can be placed in any order on any of the side rails, which allows you to adjust them for a variety of needs. A perfect match for the Architect Desk, these pieces are the strongest, and in our opinion best looking, office furniture you can find anywhere. The bookcase is hand finished and the powder coat of your choice is applied. The 4 glass shelves are 15" x 36" and are ⅜" thick.

Learn More

24"W - 22"D - 3"H Usable interior space: 19-1/4"W - 20"D Capacity: 350 lbs. Casters are okay for up to 5 shelves or 625 lbs of weight Learn More

The Equino Stool is very versatile in that it is fully adjustable, from standard table height, to counter height, to bar height. This modern and attractive seating is great for pub tables, kitchens, bars, or anywhere additional seating is needed. All seats are made from high quality washable PVC. Seats swivel above the chrome plated, solid steel base. Comfortable, stylish, strong, and affordable - what's not to love?

Learn More

Learn More

This four-shelf unit will store big collections of LPs, books, Laser Discs, or use it as an amazing display shelving unit. Each shelf will hold 200lbs (180 LPs). Additional shelves may be purchased separately and easily added on at a later date. Add front uprights to sort and separate your collection. Choose our optional casters for ease of mobility (please note the 625lbs weight limit of casters). Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.

Learn More

This three-shelf unit is a great solid shelving unit that is ready to be loaded with LPs, books, Laser Discs and looks especially good when placed in a bedroom with a Boltz Bed as display shelving! Each shelf will hold 200lbs (180 LPs). Additional shelves may be purchased separately and easily added on at a later date. Add front uprights to to sort and separate your collection. Choose our optional casters for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for anything you put on them.

Learn More

This two-shelf unit is perfect for larger collections of LPs, books, Laser Discs, or as display shelving. Each shelf will hold 200lbs (180 LPs), serving as a high capacity storage solution for those with minimal vertical space. Additional shelves may be purchased and easily added on at a later date.
Add front uprights to sort and separate your collection. Choose our optional casters for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.

Learn More

This single shelf unit will hold 200lbs (180 LPs ). A great package for those with a small collection of LPs, books, Laser Discs or for display shelving. Additional shelves may be purchased and easily added on at a later date. Add front uprights to sort and separate your collection. Choose our optional casters for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.

Learn More

The Laptop Desk is built by hand from 1½" steel tube and is finished with a floating 3/8" thick inset glass top. The desk can easily accommodate 2 Notebook Compter work areas. The long clean lines of this piece create a unique, flexible style that goes with any decor.

Learn More

Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack. Cannot be connected to any CD racks.

Learn More

Expand your MM-252 series or MM-126 with an expansion kit. There is no limit to how wide you can build your system. Each section uses precision fasteners for simple, easy assembly. Each expansion kit increases your rack's width by 24". Approx. assembly time is 40 minutes per kit. Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack.

Learn More

Add an expansion kit to double the capacity of a MM-160 to 320 DVD's, 440 CDs, 168 VHS or combo. Triples the capacity of the MM-72 to 232 DVDs, 500 CDs, 108 VHS or combo. Can also be attached to a MM-126 or MM-252. Approx. assembly time is 20 minutes. Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack.

Learn More

For the ultimate multimedia connoisseur, there are no limits with our MM-252 + 3 expansion kits. Whether your collection is comprised of DVDs, CDs, VHS, SACD, DVD-Audio or all of the above, this rack will allow you to organize and enjoy a lifetime of movies and music. This huge system holds 1,008 DVDs, 1,540 CDs or 588 VHS and can be expanded even further by adding more expansion kits - AMAZING! Includes one unassembled MM-252 and three unassembled MMEXP-T expansion kits.

Learn More

For the ultimate multimedia connoisseur, there are no limits with our MM-252 + two expansion kits. Whether your collection is comprised of DVDs, CDs, VHS, SACDs, DVD-Audio or all of the above, this rack will allow you to organize and store 756 DVDs, 1,155 CDs, or 441 VHS. Expandable as needed for a lifetime of enjoyment. Includes one unassembled MM-252 and two unassembled MMEXP-T expansion kits.

Learn More

For the music and movie connoisseur that collects media in all formats, the MM-252x2 fits the bill. Whether your collection is comprised of DVDs, CDs, VHS, SACD, DVD-Audio or all of the above, this rack will allow you to organize and enjoy a lifetime of movies and music. Increase the capacity of this rack as your collection grows by adding expansions kits. Includes one unassembled MM-252 and one unassembled MMEXP-T expansion kit.

>> view more images of our multimedia racks

Learn More

Learn More

Learn More

Learn More

Learn More

Warning: Expansion kits will not support your collection without being attached to a compatible rack.

Learn More

Learn More

Learn More

Learn More

Build Your Own!

• 24"W - 22"D - 14"H (13½" usable height)
• Usable interior space: 19-1/4"W - 20"D
• Comes with back panel and cord collector brackets
• Capacity: 250 lbs

Learn More

Build Your Own!

• 24"W - 22"D - 10"H (9½" usable height)
• Usable interior space: 19-1/4"W - 20"D
• Comes with back panel and cord collector brackets
• Capacity: 250 lbs

Learn More

Build Your Own!

• 24"W - 22"D - 7"H (6½" usable height)
• Usable interior space: 19-1/4"W - 20"D
• Comes with back panel and cord collector brackets
• Capacity: 250 lbs

Learn More

Add a fourteen-inch shelf package to your custom configured component stand. The shelf package includes two side panels, a back panel, a shelf, cord collector bracket and all necessary hardware for assembly. The fourteen-inch shelf will give you an interior usable area of 19-1/4"W x 13½"H x 21"D. The outer shelf dimensions are 24"W x 14"H x 22"D.

Learn More

Add a ten-inch shelf package to your custom configured component stand. The shelf package includes two side panels, a back panel, a shelf, cord collector bracket and all necessary hardware for assembly. The 10" shelf will give you an interior usable area of 19-1/4"W x 9½"H x 21"D. The outer shelf dimensions are 24"W x 10"H x 22"D.

Learn More

Add a seven-inch shelf package to your custom configured component stand. The shelf package includes two side panels, a back panel, a shelf, cord collector bracket and all necessary hardware for assembly. The seven-inch shelf will give you an interior usable area of 19-1/4"W x 6½"H x 21"D. The outer shelf dimensions are 24"W x 7"H x 22"D.

Learn More

Learn More

Learn More

This two shelf unit will hold 275lbs (or up to 90 LPs ) per shelf. A perfect start for those with a small collection of LPs, books, Laser Discs. Also great for use as display shelving. Additional shelves may be purchased separately and easily added on at a later date. Optional casters can also be added for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.

Learn More

This one shelf unit will hold 200lbs or up to 90 LPs . A perfect start for those with a small collection of LPs, books, Laser Discs. Additional shelves may be purchased separately and easily added on at a later date. Optional casters can also be added for ease of mobility. Made in the USA from solid steel, the unique Boltz design is a showcase for your collection.

Learn More

Learn More

No two pieces are alike. Everything is custom made to order. Complete the look of your office for those of you who have the BOLTZ desks and office credenzas. **LIMITED QUANTITY as this price** Learn More

Learn More

Learn More

Learn More

Save big when you purchase these items as a group! This beautiful set includes our 3 Glass Coffee Table, and 2 Accent Tables. All pieces are made by hand from a 1½" steel tube and have 3/8" inset or "floating" glass tops. The coffee table has a unique 3 glass top and a midframe support running along the bottom. Each accent table has a floating glass top. The sleek steel frames accented by floating glass create a subdued classic look that is sure to go with any environment.

Learn More

Modern and refreshing, the sleek steel lines of this coffee table are accented by 3 "floating" pieces of glass that form its top. The glass is inset into the frame and supported by steel blocks welded into the corners of the frame. We used 3/8" glass so it is as strong as it is beautiful. The classic subdued style is sure to compliment any decor.

Learn More

Hand built from 1½" steel tube, this 4 tier shelving has a classic, sleek frame accented by 3/8" inset glass shelves. Sure to accentuate any decor, this display shelving is perfect for home or office. Use to store books, paperwork, or your own personal touches. Select the powder coat finish to best suit your style.

Learn More

This 2 shelf side / accent table is a perfect compliment to our Platform Bed. It is a bit taller than the small side table, and works especially well with beds that will have an extra thick mattress. It is hand welded from 1½" steel tube and has 3/8" thick glass on each shelf. Add optional casters to this side table for ease of mobility. Casters add 2½" to height.

Learn More

Use this table to compliment your office environment. We use it beside our desk as a phone table. Handmade from 1½" steel tube with ½" thick floating glass top. Finish the sleek steel frame with any of our powder coat finishes to best suite your decor.

Learn More

The sleek steel frame is accented with 3 pieces of 3/8" thick glass that "float" on the top. The subdued classic look is perfect for hallways, entryways, foyers, or offices. Pair with our 3 Glass Coffee Table, and Accent Tables to create an environment that is unique and modern. Choose any of our powder coat finishes to best suit your style.

Learn More

Our office credenza is handmade from 1½" steel tube. It sports 3 pieces of 3/8" thick glass that float in the top of the sleek steel frame. The subdued classic look is a compliment to any office decor. Great as an extra writing surface, paperwork, scanner table, or for personal touches. Our lateral and pedestal file cabinets fit perfectly underneath. Choose any of our powder coat finishes to best suit your style.

Learn More

This small two shelf table is a perfect accent to a Boltz Platform Bed. The low profile and clean lines were designed specifically to match the height of our platform beds. This table is hand welded from 1½" steel tube and has 3/8" thick glass on each shelf. Don't forget to add casters to this table for ease of mobility. Casters add 2½" to height.

Learn More

Save on this 3 piece set! This classic loft style is sure to infuse your work space with style and creativity. The Loft Desk has an oversized glass top (36x60") that sits on the steel frame.Set includes: $599 - Steel & Glass Loft Desk | $399 - Side/Phone Table | $699 - Boltz 3-Drawer Pedestal File Cabinet________$1,697 Total if purchased individually________- $298 DISCOUNT (18%)________$1,399 - 3 PIECE OFFICE TOTAL

Learn More

Bring a unique piece of strength and beauty into your home with this solid steel and glass coffee table. The second shelf sits 7.75 inches below the top. The multiple layers of glass not only provide additional space but create unique reflections and depth as light bounces between them. Add our Quarter Tables and End Tables to create your own unique space.

Learn More

Learn More

Learn More

Learn More

The Architect Series is our most unique office furniture to date. This Side / Accent Table is hand made from 1½" thick steel tube which gives it an elegant and sophisticated presence. The distinctive Architect Rectangle is present in the top of the frame and covered in glass. A perfect match for the Architect Side Coffee Table or Bed, these pieces are the strongest, and in our opinion best looking, tables you can find anywhere. Each piece is hand finished and then the powder coat of your choice is applied. The glass top is 18" x 20" x 3/8".

Learn More

Save $200 when you order this 3 piece set. These pieces would cost $2,097 if purchased individually. The Architect Series is our most unique office furniture to date. Each piece is hand made from massive 2" thick steel tube which gives the collection an elegant and sophisticated presence. The set includes the Architect Desk, Credenza, & 4 shelf Bookcase. The strength of the steel combined with open design creates pieces that are the strongest, and in our opinion best looking, office furniture you can find anywhere. Each piece is hand finished and the powder coat of your choice is applied.

Learn More

The Architect Series is our most unique office furniture to date. This executive desk frame is handmade from massive 2" thick steel tube which gives the desk an elegant and sophisticated presence. The 3 distinctive Architect rectangles are placed along the front side of the desk, creating a kind of artistic privacy panel. The minimal design creates a balance between open space and the heavy steel, that results in one of the strongest, and in our opinion best looking, desks you can find anywhere. The desks are then hand finished and the powder coat of your choice is applied. The glass top is 36" x 60" and is ½" thick with 1" radius corners.

Learn More

Save when you purchase this two piece set! The Architect Series is our most unique office furniture to date. This Coffee and Side Table set is made and finished by hand, before the powder coat of your choice is applied. The coffee table is made from 2" thick steel with the rectangles in the top being made from both 2" and 1½" thick steel tube which gives it an elegant and sophisticated presence. The Side Table is made from 1½" steel and the distinctive Architect Rectangle is present in the top of the frame and covered in glass. These pieces are the strongest, and in our opinion, best looking tables you can find anywhere.

Learn More

The Architect Series is our most unique office furniture to date. This Coffee Table is hand made from massive 2" thick steel tube which gives it an elegant and sophisticated presence. We used 2" and 1½" steel to make the rectangles in the top, with the center piece being larger than the other two. A perfect match for the Architect Side Table or Bed, these pieces are the strongest, and in our opinion best looking, tables you can find anywhere. Each piece is hand finished and then the powder coat of your choice is applied. The glass top is 22" x 67" and is 1/2" thick .

Learn More

Fiberglass body with canvas seat and cushion.

Learn More

The J. Arthur White collection represents artisan furniture in a modern, contemporary style. Each piece is hand crafted and finished by one of our 3 master welders, who have over 80 years of combined experience making high quality, unique creations. Made from 1½" thick steel, no two pieces are exactly alike, making each table as much a work of art as they are unique, beautiful furniture.

Learn More

The J. Arthur White collection represents artisan furniture in a modern, contemporary style. Each piece is hand crafted and finished by one of our 3 master welders, who have over 80 years of combined experience making high quality, unique creations. Made from 2" and 1½" thick steel, no two pieces are exactly alike, making each table as much a work of art as they are unique, beautiful furniture.

Learn More

Save $350 on this four piece set! Purchased separately, these pieces would cost $2216. The set includes our stainless steel desk, side table, equipment stand, and our raw steel pedestal file cabinet from HON. All three office pieces are made from 1½" stainless steel and finished with beautiful pieces of glass (3/8" or 1/2" thick). Minimal sleek lines combined with the modern look of stainless steel creates an office that will inspire you to do your best work. Slight differences in the swirls, or etching, of the stainless steel will be normal due to the hand finish applied to every product.

Learn More

Save $250 on this three piece set! Purchased separately, these pieces would cost $1817. The set includes our stainless steel desk, side table, and equipment stand. All three pieces are made from 1½" stainless steel and finished with a 1/2" thick piece of glass. Minimal sleek lines combined with the modern look of stainless steel creates an office that will inspire you to do your best work. Slight differences in the swirls, or etching, of the stainless steel will be normal due to the hand finish applied to every product. Does not include the pedestal file cabinet.

Learn More

Change your perspective!!! By simply raising your work surface by a foot, your entire environment is more enjoyable. Our 42.75" tall desk is perfect for a workstation or laptop desk. The boss says it is great as a tall Credenza for sorting papers or taking a few minutes to do paperwork standing up. Use a standard bar height stool to make this the perfect tall office desk! Made from 1½" stainless steel and finished with 3/8" thick glass.

Learn More

Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. The Studio Collection Desk is 24" x 48" and come with a 5/8" thick glass top that sets on top and goes edge to edge. Every desk comes on wheels, which include 2 locking and 2 non-locking casters per set. The overall height of the desk including the casters is 30". Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship. Note: Shown here in Brushed Steel Finish for illustration purposes.

Learn More

Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. The Studio Collection Desk is 24" x 48" and come with a 5/8" thick glass top that sets on top and goes edge to edge. Every desk comes on wheels, which include 2 locking and 2 non-locking casters per set. The overall height of the desk including the casters is 30". Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship. Note: Shown here in Brushed Steel Finish for illustration purposes.

Learn More

This was the first edition of a Studio Collection Desk and Side Table, they were 30" and had no casters. When we started including the casters, we reduced the height. Take advantage of these prototypes and save big on the set..Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship.

Learn More

For ease of mobility, add these 5 heavy duty casters to your order. The non marking rubber wheels are perfect for almost any floor surface including hardwood, carpet, tile, etc. Casters will increase the height of your product by 3-3/4". Includes a matched set of 2 locking and 3 non-locking casters. NOTE: Locking casters can not be combined with our old style non-locking casters because of a quarter inch height difference.

Please, always use caution when moving heavy stands on casters and never exceed the maximum capacity of 625 lbs.Note: If adding casters to an older Boltz TV stand, be sure the base has a flange with holes underneath.

Learn More

These casters are for use with our 1½" tube furniture such as our A/V caddies and printer stands (shown in picture). They add 2½" to the height of your product and have non marking rubber wheels. These small casters add mobility and flexibility and can hold up to 300 lbs. Set of 4.

Learn More