Audio/Visual

LP Record Storage Rack Sold Separately
Add a pair of front uprights to your shelves to keep your LPs, Books, Laser Discs, or other items in place. These uprights are identical to the back supports, but instead of bolting in, these simply slide snugly into place. They come with a slim pad for the top and bottom to keep them from scratching the surface of your shelves.

This unique TV Table combines 2" and 1" steel with heavy ½" thick glass shelves to create a contemporary look. The 67" width can accommodate large displays (including most 70" sets) and is perfect for today's generation of large HDTV / PLASMA / LCD sets. And of course, it is built to hold a lot of weight. With the dual midframe supports, each shelf can easily handle up to 300lbs. The second shelf has room for several components or center channel speaker.

For ease of mobility, add these 5 heavy duty casters to your order. The non marking rubber wheels are perfect for almost any floor surface including hardwood, carpet, tile, etc. Casters will increase the height of your product by 3-3/4". Includes a matched set of 2 locking and 3 non-locking casters. NOTE: Locking casters can not be combined with our old style non-locking casters because of a quarter inch height difference.

Please, always use caution when moving heavy stands on casters and never exceed the maximum capacity of 625 lbs.Note: If adding casters to an older Boltz TV stand, be sure the base has a flange with holes underneath.

This amazing A/V unit is a showcase for your TV and components. Handmade from massive 2" steel and finished with three pieces of ½" thick glass, it is as strong as it is beautiful. The top piece of glass insets into the top, the second shelf holds 4 - 6 components with room for a center chanel speaker, and the cubby at the bottom is perfect for your heavy receiver, with a midframe support underneath. Completed with the powdercoat finish of your choice to make a Plasma/LCD stand that is as strong as it is beautiful. Exclusively at Boltz.com.

Thin is in, and our Plasma Stands are built to hold todays' generation of increasingly thinner plasma displays.This Plasma Stand and A/V caddy combo are built by hand from 1½" steel tube and are finished with 3/8" thick floating glass shelves. The stand can easily hold 80lbs and accommodate up to a 50" display. The A/V caddy can be set under or beside the stand to best suit your home theater setup and will hold 2-4 components. Each shelf on the Caddy will hold up to 150lbs. Add casters to the caddy for ease of mobility.

This 3 piece Plasma/LCD Stand grouping consists of our 3 glass plasma stand, and two A/V caddies. Each piece is individually crafted in the USA. 3/8" thick glass shelves are inset flush with the steel, and float on 1" square blocks of solid steel. The 3 glass stand can accommodate up to a 70" plasma or LCD display and will support up to 500lbs spread evenly across the entire top. The A/V caddies include 2 floating glass shelves which can hold up to 150lbs each and have plenty of room for two components on each shelf. Add casters to the caddies for ease of mobility.

Warning: Expansion kits will not support your collection without being attached to a compatible rack.

Purchased individually, this set would cost $2,407! This 3 piece set includes two 5 Tier Towers, one TV Table, and glass for all shelves. Built from welded 1½" steel with 3/8" glass shelves. The TV Table has dual midframe steel rails on the top to support up to 300lbs. The second shelf has plenty of room for components and center channel speaker. Each A/V tower has 5 tiers and cord management system. 1st, 3rd, and 4th shelf will hold up to 80lbs. 2nd and bottom shelves will hold up to 180lbs because of the added midframe supports.

This cool little wall hanging rack holds 110 CDs. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps CDs in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 10 - 15 minutes to put together.

Take the CD-110 and multiply it by 2 and you get double the capacity and double the cool. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps CDs in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 20 - 30 minutes to put together.

Add an expansion kit to double the capacity of a MM-160 to 320 DVD's, 440 CDs, 168 VHS or combo. Triples the capacity of the MM-72 to 232 DVDs, 500 CDs, 108 VHS or combo. Can also be attached to a MM-126 or MM-252. Approx. assembly time is 20 minutes. Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack.

This cool wall hanging rack holds 76 DVDs / 110 CDs / 36 VHS. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps stored media in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 10 - 15 minutes to put together.